Port-to-port sea distance

Hound Point to Philadelphia distance

The sea distance from Hound Point (United Kingdom) to Philadelphia (United States) is about 3,240 nautical miles (6,000 km), on the open-sea route. At 12 knots that is about 11 days 6 hours at sea.

Distance

3,240 nm

6,000 km

Sea days @ 12 kn

11.2

11 days 6 hours

ECA miles

825 nm

25% of the route

Canals & straits

Open-sea route

Run the TCE free See on map

Sea days by speed

Speed	One way	Round voyage
10 knots	13.5 days	27.0 days
11 knots	12.3 days	24.5 days
12 knots	11.2 days	22.5 days
13 knots	10.4 days	20.8 days
14 knots	9.6 days	19.3 days
15 knots	9.0 days	18.0 days

Steaming time only, with no allowance for weather, canal waiting or port time. The round voyage assumes the ship ballasts back on the same route.

Routes compared

Shortest route

3,240 nm

11.2 days at 12 kn · no canals or straits · 825 nm in ECA

See it on the map

Voyage estimates by ship size

About this trade

North Sea crude. North Sea grades loaded at Sullom Voe, Hound Point, Mongstad and Sture, moved short-haul into Europe or arbitraged long-haul to Asia.

Typical ship sizes: Aframax, Suezmax

Questions

How far is Hound Point from Philadelphia by sea?

The sea distance from Hound Point to Philadelphia is about 3,240 nautical miles (6,000 km), on the open-sea route.

How long does a tanker take to sail from Hound Point to Philadelphia?

About 11 days 6 hours at 12 knots, or 9.6 days at 14 knots. That is steaming time only; add time for port calls, canal transits and weather.

Which canals and straits does the Hound Point–Philadelphia route pass?

None. The shortest route stays in open water without passing a major canal or strait.

How much of the voyage is inside an Emission Control Area?

About 825 nm, or 25% of the voyage, is inside an ECA, where ships must burn 0.10% sulphur fuel or use a scrubber.

Terms on this page

Distances are calculated by Vessbook on a modelled global shipping-lane network for a tanker at 12 m draft, from berth area to berth area.